Global Sources Hong Kong 2026: Oceanview at Booth 10R24
Global Sources Hong Kong 2026: Oceanview at Booth 10R24
April 11, 2026
Oceanview (Guangdong) Sci-Tech Co., Ltd. is exhibiting at Global Sources Hong Kong 2026 Phase 1 from April 11 to 14, 2026, presenting OLED, 320Hz Fast IPS and 49-inch 5K monitors at Booth 10R24, Hall 10, AsiaWorld-Expo, Hong Kong.
The four-day run opens the three-phase April programme at AsiaWorld-Expo. Global Sources has built the 2026 spring opening phase around consumer electronics, electronic components and gaming, drawing roughly 4,000 booths from more than 2,000 Asian suppliers, according to the organiser's pre-show figures. Oceanview's stand sits inside the consumer electronics and gaming zone, and the units on it are production-line samples that any visitor can power on, connect and test on the spot.
Compatibility, Not the Spec Sheet, Is Now the Sourcing Filter
Buyers at this show shortlist monitors by what they plug into them, not by the numbers printed on the box.
The shift is visible in how the organiser framed the 2026 spring phase. Global Sources grouped the floor by real-world use case rather than by product category, on the argument that procurement teams now compare how complete a solution is in practice instead of how two spec sheets line up. For a monitor supplier, that reframes the first question from "what is the refresh rate" to "will this unit hold 240Hz on the buyer's actual graphics card, console and dock".
Oceanview answers that with a validation matrix it runs before any model leaves the factory. The matrix covers five failure points — EDID handshake, resolution and refresh-rate negotiation, HDR metadata handling, variable refresh rate behaviour, and DisplayPort Alt Mode over USB-C — because those five account for most of the compatibility complaints that reach an RMA desk.
Reliability testing runs on the same site. Oceanview's in-house lab holds a high-low temperature chamber, a vibration table, a drop tester, a key-life tester, a 22KV electrostatic discharge generator and Konica Minolta CA-410 color analyzers, and the results feed back into panel sourcing rather than into a certificate file. End-to-end first-pass yield sits at or above 98%, the blended annual RMA rate is held at or below 0.6%, and office-oriented models stay at or below 0.3%.
The Factory Behind the Booth
Oceanview has manufactured displays since the VIEWG brand was founded in 1999, and the current operation runs from a 15,000㎡ plant in Foshan, Guangdong, with more than 280 employees, four backlight module lines built to Class 1,000 cleanroom standard, four complete-unit assembly lines and four in-line aging lines. Annual capacity is three million units against revenue of roughly RMB 400 million.
Certification is maintained per model rather than per factory: CE, CB, RoHS, FCC, KC, KCC and Energy Star are prepared according to the destination market, on top of ISO 9001 and ISO 14001 system certification and BSCI social compliance. The company holds national high-tech enterprise status granted in 2024 and a Guangdong specialised and sophisticated SME designation from 2023.
OEM and ODM Terms You Can Settle at the Show
Commercial terms are quoted at the booth rather than after the show, because most visitors arrive with a target price and a destination market already fixed.
MOQ: 300 units per model for 27-inch OLED and 27-inch gaming models, 300 units for the 34-inch curved tooling, and 100 units for the 49-inch 5K model.
Lead time: about 20 days for small-volume orders and roughly 30 days for large-volume orders, counted from sign-off on artwork and specification.
Customisation: logo printing, user manual, packaging design, base configuration, interface configuration, boot logo, panel specification and private mold development.
Certification: the package is assembled per destination market, so a CE/FCC build and a KC/KCC build can run on the same line in the same month.
Quotation: standard inquiries are answered within 24 hours on working days.
Visit Oceanview at AsiaWorld-Expo
Global Sources Hong Kong 2026, Phase 1
Dates: April 11–14, 2026 | Booth: Hall 10, R24 | Venue: AsiaWorld-Expo, Hong Kong SAR
Walk-in visitors are welcome across all four days. Buyers who want a scheduled slot should send the target specification, destination market and estimated first order quantity in advance, so the export team can bring matched samples and the correct certification file to the meeting. The lines shown at the booth are also listed online: the gaming monitor range, the OLED range, the 5K and ultrawide range, all-in-one PCs, and the full product catalog.
Frequently Asked Questions
Where is Oceanview exhibiting at Global Sources Hong Kong 2026?
Hall 10, Booth R24 at AsiaWorld-Expo, Hong Kong SAR, open April 11–14, 2026 during Phase 1 of the spring show.
What is the minimum order quantity for OEM monitor production?
300 units per model for 27-inch OLED and 27-inch gaming models, 500 units for the 34-inch curved model, and 100 units for the 49-inch 5K model.
How long does Oceanview take to deliver an OEM monitor order?
About 20 days for small-volume orders and roughly 30 days for large-volume orders, counted from sign-off on artwork and specification.
Can Oceanview customise logo, packaging and housing?
Yes. Logo printing, user manual, packaging design, base and interface configuration, boot logo, panel specification and private mold development are all available, with in-house tooling on core models.
Which certifications do Oceanview monitors carry?
CE, CB, RoHS, FCC, KC, KCC and Energy Star, prepared per destination market, alongside ISO 9001 and ISO 14001 system certification and BSCI social compliance.
Do Oceanview monitors work with PS5, Xbox and MacBook?
Yes. Every model is validated against NVIDIA GeForce GTX 1050 Ti to RTX 5060, AMD Radeon RX 6600 to RX 7800 XT, PlayStation 5 and PS5 Pro, Xbox Series X|S, Nintendo Switch, and MacBook, Huawei and Samsung laptops over USB-C.
How can I book a meeting with Oceanview at the show?
Send the target specification, destination market and estimated first order quantity to the export team before April 11, and a slot with matched samples will be reserved at Booth 10R24.
Если вы заинтересованы в нашей продукции и хотите узнать более подробную информацию, пожалуйста, оставьте сообщение здесь, мы ответим вам, как только сможем.